Terminal log file
Date: 23.02.2016 - 16:08:07
-----------------------------------------------


U-Boot 1.1.4 (May  6 2013 - 13:20:30)

U-boot AP123


DRAM:  64 MB
id read 0x100000ff
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
file: ag934x.c,line: 179==: set LAN&WAN SWAP. --debug by HouXB
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init 
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
file: ag934x.c,line: 179==: set LAN&WAN SWAP. --debug by HouXB
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan 
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
enet1 port1 up
dup 1 speed 1000
Using eth1 device
host 192.168.1.100 is alive. --debug by HouXB
Autobooting in 1 seconds
Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.111
Filename 'vxWorks.bin'.
Load address: 0x80001000
Loading: *T T T T 
-----------------------------------------------
Date: 23.02.2016 - 16:08:48
End log file