-
vladdi
-
-
Offline
-
Осваиваюсь на форуме
-
- Сообщений: 38
-
Репутация: 0
-
|
logread
for cache data failed
Mar 14 15:55:04 OpenWrt kern.err kernel: [ 12.520000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 12.640000] sda: sda1
Mar 14 15:55:04 OpenWrt kern.err kernel: [ 12.640000] sd 0:0:0:0: [sda] Asking for cache data failed
Mar 14 15:55:04 OpenWrt kern.err kernel: [ 12.650000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Mar 14 15:55:04 OpenWrt kern.notice kernel: [ 12.660000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 23.230000] eth0: link down
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 24.730000] eth0: link up (1000Mbps/Full duplex)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 32.120000] eth0: link down
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.580000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.590000] Backport based on wireless-testing.git master-2012-09-07
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.600000] compat.git: wireless-testing.git
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.700000] cfg80211: Calling CRDA to update world regulatory domain
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.700000] cfg80211: World regulatory domain updated:
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.720000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.730000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 33.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.warn kernel: [ 34.550000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: EEPROM regdomain: 0x0
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: EEPROM indicates default country code should be used
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: doing EEPROM country->regdmn map search
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: country maps to regdmn code: 0x3a
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: Country alpha2 being used: US
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ath: Regpair used: 0x3a
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mar 14 15:55:04 OpenWrt kern.debug kernel: [ 34.570000] Registered led device: ath9k-phy0
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.570000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.580000] cfg80211: Calling CRDA for country: US
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.590000] cfg80211: Regulatory domain changed to country: US
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.620000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.630000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 34.820000] NTFS driver 2.1.30 [Flags: R/O MODULE].
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 35.050000] PPP generic driver version 2.4.2
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 35.310000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 14 15:55:04 OpenWrt kern.info kernel: [ 35.440000] NET: Registered protocol family 24
Mar 14 15:55:08 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Mar 14 15:55:08 OpenWrt kern.info kernel: [ 41.560000] device eth0 entered promiscuous mode
Mar 14 15:55:08 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Mar 14 15:55:08 OpenWrt daemon.notice netifd: wan (787): udhcpc (v1.19.4) started
Mar 14 15:55:08 OpenWrt daemon.notice netifd: wan (787): Sending discover...
Mar 14 15:55:09 OpenWrt kern.info kernel: [ 42.160000] eth0: link up (1000Mbps/Full duplex)
Mar 14 15:55:09 OpenWrt kern.info kernel: [ 42.160000] br-lan: port 1(eth0) entered forwarding state
Mar 14 15:55:09 OpenWrt kern.info kernel: [ 42.170000] br-lan: port 1(eth0) entered forwarding state
Mar 14 15:55:09 OpenWrt user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Mar 14 15:55:11 OpenWrt kern.info kernel: [ 44.170000] br-lan: port 1(eth0) entered forwarding state
Mar 14 15:55:11 OpenWrt kern.info kernel: [ 44.320000] eth1: link up (100Mbps/Full duplex)
Mar 14 15:55:11 OpenWrt daemon.notice netifd: wan (787): Sending discover...
Mar 14 15:55:12 OpenWrt user.notice ifup: Enabling Router Solicitations on loopback (lo)
Mar 14 15:55:14 OpenWrt kern.info kernel: [ 47.350000] cfg80211: Calling CRDA for country: UA
Mar 14 15:55:14 OpenWrt kern.info kernel: [ 47.360000] cfg80211: Regulatory domain changed to country: UA
Mar 14 15:55:14 OpenWrt kern.info kernel: [ 47.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 14 15:55:14 OpenWrt kern.info kernel: [ 47.370000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 14 15:55:14 OpenWrt daemon.notice netifd: wan (787): Sending discover...
Mar 14 15:55:14 OpenWrt daemon.notice netifd: wan (787): Sending select for 95.69.225.140...
Mar 14 15:55:15 OpenWrt daemon.notice netifd: wan (787): Lease of 95.69.225.140 obtained, lease time 1296000
Mar 14 15:55:15 OpenWrt daemon.notice netifd: Interface 'wan' is now up
Mar 14 15:55:18 OpenWrt user.notice ifup: Allowing Router Advertisements on wan (eth1)
Mar 14 15:55:18 OpenWrt kern.info kernel: [ 51.730000] device wlan0 entered promiscuous mode
Mar 14 15:55:19 OpenWrt kern.info kernel: [ 52.830000] br-lan: port 2(wlan0) entered forwarding state
Mar 14 15:55:19 OpenWrt kern.info kernel: [ 52.840000] br-lan: port 2(wlan0) entered forwarding state
Mar 14 15:55:21 OpenWrt kern.info kernel: [ 54.840000] br-lan: port 2(wlan0) entered forwarding state
Mar 14 15:55:26 OpenWrt user.info sysinit: Loading defaults
Mar 14 15:55:26 OpenWrt user.info sysinit: Loading synflood protection
Mar 14 15:55:26 OpenWrt user.info sysinit: Adding custom chains
Mar 14 15:55:27 OpenWrt user.info sysinit: Loading zones
Mar 14 15:55:29 OpenWrt user.info sysinit: Loading forwardings
Mar 14 15:55:29 OpenWrt user.info sysinit: Loading rules
Mar 14 15:55:29 OpenWrt user.info sysinit: Loading redirects
Mar 14 15:55:29 OpenWrt user.info sysinit: Loading includes
Mar 14 15:55:30 OpenWrt user.info sysinit: Optimizing conntrack
Mar 14 15:55:30 OpenWrt user.info sysinit: Loading interfaces
Mar 14 15:55:30 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Mar 14 15:55:31 OpenWrt user.info firewall: adding wan (eth1) to zone wan
Mar 14 15:55:34 OpenWrt kern.err kernel: [ 67.550000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
Mar 14 15:55:34 OpenWrt kern.err kernel: [ 67.570000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
Mar 14 15:55:34 OpenWrt kern.info kernel: [ 67.630000] EXT4-fs (sda1): recovery complete
Mar 14 15:55:34 OpenWrt kern.info kernel: [ 67.640000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar 14 15:55:35 OpenWrt authpriv.info dropbear[1840]: Running in background
Mar 14 15:55:37 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mar 14 15:55:37 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: started, version 2.62 cachesize 150
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: using local addresses only for domain lan
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: reading /tmp/resolv.conf.auto
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: using nameserver 188.230.76.22#53
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: using nameserver 188.230.119.19#53
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: using local addresses only for domain lan
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq[1923]: read /etc/hosts - 1 addresses
Mar 14 15:55:40 OpenWrt daemon.info dnsmasq-dhcp[1923]: read /etc/ethers - 0 addresses
Mar 14 15:55:43 OpenWrt user.info sysinit: setting up led USB
Mar 14 15:55:48 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPDISCOVER(br-lan) 28:07:0a:00:39:2b
Mar 14 15:55:48 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPOFFER(br-lan) 192.168.1.129 28:07:0a:00:39:2b
Mar 14 15:55:48 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPREQUEST(br-lan) 192.168.1.129 28:07:0a:00:39:2b
Mar 14 15:55:48 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPACK(br-lan) 192.168.1.129 28:07:0a:00:39:2b
Mar 15 08:21:25 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPDISCOVER(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 08:21:25 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPOFFER(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 08:21:25 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPREQUEST(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 08:21:25 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPACK(br-lan) 192.168.1.198 00:30:84:2e:02:d4 loner-xp
Mar 15 08:26:15 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPINFORM(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 08:26:15 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPACK(br-lan) 192.168.1.198 00:30:84:2e:02:d4 loner-xp
Mar 15 08:41:54 OpenWrt authpriv.info dropbear[1974]: Child connection from 183.136.216.4:55286
Mar 15 08:42:01 OpenWrt authpriv.info dropbear[1974]: Exit before auth: Disconnect received
Mar 15 08:47:27 OpenWrt authpriv.info dropbear[1975]: Child connection from 115.230.126.151:46383
Mar 15 08:47:38 OpenWrt authpriv.info dropbear[1975]: Exit before auth: Disconnect received
Mar 15 08:56:47 OpenWrt authpriv.info dropbear[1978]: Child connection from 103.41.124.47:33775
Mar 15 08:56:51 OpenWrt authpriv.info dropbear[1978]: Exit before auth: Disconnect received
Mar 15 09:02:54 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPREQUEST(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 09:02:54 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPACK(br-lan) 192.168.1.198 00:30:84:2e:02:d4 loner-xp
Mar 15 09:12:50 OpenWrt authpriv.info dropbear[1984]: Child connection from 115.231.218.130:35212
Mar 15 09:12:54 OpenWrt authpriv.info dropbear[1984]: Exit before auth: Disconnect received
Mar 15 09:31:44 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPREQUEST(br-lan) 192.168.1.198 00:30:84:2e:02:d4
Mar 15 09:31:44 OpenWrt daemon.info dnsmasq-dhcp[1923]: DHCPACK(br-lan) 192.168.1.198 00:30:84:2e:02:d4 loner-xp
Mar 15 09:38:32 OpenWrt authpriv.info dropbear[1990]: Child connection from 115.239.228.35:56579
Mar 15 09:38:37 OpenWrt authpriv.info dropbear[1990]: Exit before auth: Disconnect received
Mar 15 09:38:57 OpenWrt authpriv.info dropbear[1991]: Child connection from 192.168.1.198:1493
Mar 15 09:39:07 OpenWrt authpriv.notice dropbear[1991]: Password auth succeeded for 'root' from 192.168.1.198:1493
root@OpenWrt:~#
dmesg
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802f1100, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-MR3420 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61488k/65536k available (2211k kernel code, 4048k reserved, 418k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
[ 0.100000] MIPS: machine is TP-LINK TL-MR3420
[ 0.500000] registering PCI controller with io_map_base unset
[ 0.540000] bio: create slab <bio-0> at 0
[ 0.550000] PCI host bridge to bus 0000:00
[ 0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.560000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.560000] pci 0000:00:00.0: [168c:002e] type 0 class 0x000280
[ 0.560000] pci 0000:00:00.0: fixup device configuration
[ 0.570000] pci 0000:00:00.0: reg 10: [mem 0x10000000-0x1000ffff 64bit]
[ 0.570000] pci 0000:00:00.0: supports D1
[ 0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[ 0.570000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.580000] Switching to clocksource MIPS
[ 0.580000] NET: Registered protocol family 2
[ 0.590000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.590000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.600000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.600000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.610000] TCP reno registered
[ 0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.630000] NET: Registered protocol family 1
[ 0.630000] PCI: CLS 0 bytes, default 32
[ 0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.650000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.670000] msgmni has been set to 120
[ 0.670000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.680000] io scheduler noop registered
[ 0.680000] io scheduler deadline registered (default)
[ 0.690000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.720000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.730000] console [ttyS0] enabled, bootconsole disabled
[ 0.740000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.750000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.750000] 5 tp-link partitions found on MTD device spi0.0
[ 0.760000] Creating 5 MTD partitions on "spi0.0":
[ 0.760000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.770000] 0x000000020000-0x00000010bc00 : "kernel"
[ 0.770000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.790000] 0x00000010bc00-0x000000ff0000 : "rootfs"
[ 0.790000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.810000] mtd: partition "rootfs" set to be root filesystem
[ 0.810000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=D10000
[ 0.820000] 0x0000002e0000-0x000000ff0000 : "rootfs_data"
[ 0.830000] 0x000000ff0000-0x000001000000 : "art"
[ 0.830000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.860000] ag71xx_mdio: probed
[ 0.870000] eth0: Atheros AG71xx at 0xba000000, irq 5
[ 1.420000] eth0: Found an AR7240/AR9330 built-in switch
[ 2.460000] eth1: Atheros AG71xx at 0xb9000000, irq 4
[ 3.010000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 3.020000] TCP cubic registered
[ 3.020000] NET: Registered protocol family 17
[ 3.030000] Bridge firewalling registered
[ 3.030000] 8021q: 802.1Q VLAN Support v1.8
[ 3.040000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.050000] Freeing unused kernel memory: 212k freed
[ 6.120000] Registered led device: tp-link:green:system
[ 6.120000] Registered led device: tp-link:green:qss
[ 6.120000] Registered led device: tp-link:green:3g
[ 6.690000] eth0: link up (1000Mbps/Full duplex)
[ 9.530000] JFFS2 notice: (456) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 58 of xref (0 dead, 46 orphan) found.
[ 10.170000] SCSI subsystem initialized
[ 10.340000] usbcore: registered new interface driver usbfs
[ 10.350000] usbcore: registered new interface driver hub
[ 10.360000] usbcore: registered new device driver usb
[ 10.910000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.920000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 10.930000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.960000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 10.980000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 10.980000] hub 1-0:1.0: USB hub found
[ 10.990000] hub 1-0:1.0: 1 port detected
[ 11.000000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.060000] Initializing USB Mass Storage driver...
[ 11.070000] usbcore: registered new interface driver usb-storage
[ 11.080000] USB Mass Storage support registered.
[ 11.310000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 11.460000] scsi0 : usb-storage 1-1:1.0
[ 12.470000] scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 0.00 PQ: 0 ANSI: 2
[ 12.480000] sd 0:0:0:0: [sda] 1974271 512-byte logical blocks: (1.01 GB/963 MiB)
[ 12.490000] sd 0:0:0:0: [sda] Write Protect is off
[ 12.490000] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 12.490000] sd 0:0:0:0: [sda] Asking for cache data failed
[ 12.500000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 12.510000] sd 0:0:0:0: [sda] Asking for cache data failed
[ 12.520000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 12.640000] sda: sda1
[ 12.640000] sd 0:0:0:0: [sda] Asking for cache data failed
[ 12.650000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 12.660000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 23.230000] eth0: link down
[ 24.730000] eth0: link up (1000Mbps/Full duplex)
[ 32.120000] eth0: link down
[ 33.580000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 33.590000] Backport based on wireless-testing.git master-2012-09-07
[ 33.600000] compat.git: wireless-testing.git
[ 33.700000] cfg80211: Calling CRDA to update world regulatory domain
[ 33.700000] cfg80211: World regulatory domain updated:
[ 33.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 33.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.720000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.730000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.550000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 34.570000] ath: EEPROM regdomain: 0x0
[ 34.570000] ath: EEPROM indicates default country code should be used
[ 34.570000] ath: doing EEPROM country->regdmn map search
[ 34.570000] ath: country maps to regdmn code: 0x3a
[ 34.570000] ath: Country alpha2 being used: US
[ 34.570000] ath: Regpair used: 0x3a
[ 34.570000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 34.570000] Registered led device: ath9k-phy0
[ 34.570000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=40
[ 34.580000] cfg80211: Calling CRDA for country: US
[ 34.590000] cfg80211: Regulatory domain changed to country: US
[ 34.590000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 34.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 34.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.620000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.630000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 34.820000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 35.050000] PPP generic driver version 2.4.2
[ 35.310000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.440000] NET: Registered protocol family 24
[ 35.490000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 35.880000] usbcore: registered new interface driver ums-alauda
[ 35.900000] usbcore: registered new interface driver ums-cypress
[ 35.930000] usbcore: registered new interface driver ums-datafab
[ 35.950000] usbcore: registered new interface driver ums-freecom
[ 35.980000] usbcore: registered new interface driver ums-isd200
[ 36.000000] usbcore: registered new interface driver ums-jumpshot
[ 36.020000] usbcore: registered new interface driver ums-karma
[ 36.050000] usbcore: registered new interface driver ums-sddr09
[ 36.080000] usbcore: registered new interface driver ums-sddr55
[ 36.110000] usbcore: registered new interface driver ums-usbat
[ 41.560000] device eth0 entered promiscuous mode
[ 42.160000] eth0: link up (1000Mbps/Full duplex)
[ 42.160000] br-lan: port 1(eth0) entered forwarding state
[ 42.170000] br-lan: port 1(eth0) entered forwarding state
[ 44.170000] br-lan: port 1(eth0) entered forwarding state
[ 44.320000] eth1: link up (100Mbps/Full duplex)
[ 47.350000] cfg80211: Calling CRDA for country: UA
[ 47.360000] cfg80211: Regulatory domain changed to country: UA
[ 47.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 47.370000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 51.730000] device wlan0 entered promiscuous mode
[ 52.830000] br-lan: port 2(wlan0) entered forwarding state
[ 52.840000] br-lan: port 2(wlan0) entered forwarding state
[ 54.840000] br-lan: port 2(wlan0) entered forwarding state
[ 67.550000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 67.570000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 67.630000] EXT4-fs (sda1): recovery complete
[ 67.640000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
root@OpenWrt:~#
|